No data
What is the difference between shaft retaining ring and hole retaining ring
Release time:
2022-11-10
The shaft retaining ring is a kind of hole movement installed on the groove shaft and used as a fixed part. The inner diameter of this kind of retaining ring is slightly smaller than the diameter of the assembly shaft. During installation, the clamp mouth must be inserted into the clamp hole of the retaining ring with circlip pliers, and the retaining ring can be expanded before being put into the pre-processed shaft groove. The hole with a retaining ring installed in the round hole, used as a fixed part of the axial movement, the outer diameter of this type of retaining ring is slightly larger than the diameter of the assembly round hole diameter. During installation, the clamp mouth must be inserted into the clamp hole of the retaining ring with circlip pliers, and the retaining ring can be clamped before being put into the groove of the pre-processed round hole.
The shaft retaining ring is a kind of hole movement installed on the groove shaft and used as a fixed part. The inner diameter of this kind of retaining ring is slightly smaller than the diameter of the assembly shaft. During installation, the clamp mouth must be inserted into the clamp hole of the retaining ring with circlip pliers, and the retaining ring can be expanded before being put into the pre-processed shaft groove. The hole with a retaining ring installed in the round hole, used as a fixed part of the axial movement, the outer diameter of this type of retaining ring is slightly larger than the diameter of the assembly round hole diameter. During installation, the clamp mouth must be inserted into the clamp hole of the retaining ring with circlip pliers, and the retaining ring can be clamped before being put into the groove of the pre-processed round hole.
Telephone:
Mailbox:
Address:
No.3, Worthy Avenue, Xinchang County, Zhejiang Province
Zhejiang Xinyongli Card Ring Co., Ltd.©All rights reserved
powered by:www.300.cn | city substation